This section describes
how to remove and refit the instrument cluster on the S2. This is required
when backlight illumination bulbs need replaced or if any other component
of the instrument cluster needs attention - such as the ambient temperature
display module or the autocheck/trip computer.
NEW - Information on the MIL
circuit added. The cheapest, most useful S2 uprgade ever !
|
|
Removal of the instrument
cluster can be accomplished with the bare minimum of tools. A little patience
is required to do this job to ensure you do not damage the cluster or the
control stalks.
It is not a time consuming task, but
I recommend you don't want to do it in a hurry as it can be fiddly removing
some of the electrical connectors.
|